Description

The Speedhut 2-5/8" 100-250F Water Temp Gauge – 90° Sweep (L25-WT3-LEG) is a reliable instrument designed to provide accurate monitoring of your engine’s coolant temperature. This gauge helps you stay informed about your engine’s operating conditions, aiding in the prevention of overheating and potential engine damage. Featuring a clear 90-degree sweep, the gauge offers easy readability of temperature readings within the 100 to 250 degrees Fahrenheit range. It is designed for a 2 5/8 inch mounting hole and operates with a high-performance 2-wire temperature sender.

KEY FEATURES AND BENEFITS:

• Accurate Temperature Monitoring: Provides precise readings of your engine’s coolant temperature, allowing for proactive maintenance and preventing overheating.
• Clear Readability: The 2-5/8" size and 90-degree sweep ensure that the temperature is easily visible at a glance.
• Performance Sender Included: Comes with a 2-wire performance temperature sender, potentially offering enhanced accuracy and response.
• Complete Wiring Solution: Includes all necessary wiring harnesses for power, lighting (for LED-lit models), and connection to the temperature sensor, simplifying the installation process.
• Standard Measurement: Displays temperature in Fahrenheit, aligning with common automotive standards.

SPECIFICATIONS:

• Gauge Type: Temperature Gauge
• Gauge Subtype: Water Temperature Gauge
• Temp Sender Type: 2-Wire Temp Sender (Performance)
• Range: 100-250 F
• Size: 2 5/8 inch
• Hole Size: 2.67" (68mm)
• Standard or Metric: Standard
• Warning Light: No
• Ships With:
  • 3 ft Power & Lighting Harness – for LED Lit Gauges and Clocks
  • Speedhut Temperature Sensor
  • Temperature Gauge Wiring Harness (2-Wire Cable)

HOW TO USE:

1. Mount the Gauge: Secure the 2-5/8" gauge into a 2.67" (68mm) diameter opening in your desired location (dashboard, gauge pod, etc.).
2. Install the Temperature Sensor: Mount the included Speedhut 2-wire performance temperature sensor in the appropriate location on your engine where coolant temperature can be accurately measured (typically a coolant passage or thermostat housing).
3. Connect the Sensor Wiring: Run the provided Temperature Gauge Wiring Harness (2-wire cable) from the temperature sensor to the back of the gauge, connecting the wires according to the gauge’s wiring diagram (refer to the Speedhut documentation).
4. Connect the Power and Lighting Harness: Connect the 3 ft Power & Lighting Harness to a suitable power source in your vehicle (typically an ignition-switched power source and a ground). If your gauge is LED-lit, connect the lighting wire to your vehicle’s lighting circuit if desired.
5. Verify Connections: Double-check all wiring connections to ensure they are secure and correct.
6. Test the Gauge: Start your vehicle and allow it to reach operating temperature. Observe the gauge to ensure it is providing accurate temperature readings.

BENEFITS OF USING THE SPEEDHUT 2-5/8" 100-250F WATER TEMP GAUGE – 90° SWEEP (L25-WT3-LEG):

• Provides a clear and reliable way to monitor your engine’s coolant temperature.
• Helps detect potential overheating issues early, preventing costly engine damage.
• Ensures the longevity and optimal performance of your vehicle.
• The inclusion of a performance temperature sender enhances accuracy.
• Complete wiring harnesses simplify the installation process, making it easier to integrate into your vehicle’s instrumentation.
• Staying informed about your engine’s temperature helps you drive with greater confidence.
• Allows for proactive action in addressing cooling system problems as they arise.

FEATURES:

• Optimal Size: The 2-5/8" diameter offers a balance between visibility and fitting into various gauge setups.
• Wide Measurement Range: Accurately displays temperatures from 100°F to 250°F, covering typical engine operating conditions.
• 90° Sweep Display: Provides an easy-to-read arc for quick temperature assessment.
• Dedicated Performance Sender: Designed to work specifically with the gauge for potentially improved accuracy and response.
• Included Wiring: Comes with specific harnesses for power, lighting, and sensor connection, streamlining installation.
• Precise Fitment: Engineered for a standard 2.67" (68mm) mounting hole.