Description

The Speedhut 2-5/8" 0-15 PSI Boost Gauge w/ Warning (R25-B2-REV) offers precise monitoring of your engine’s forced induction system. This gauge displays both positive pressure generated by turbochargers or superchargers (boost) within a 0 to 15 PSI range, and negative pressure (vacuum) during engine idle or deceleration. Equipped with a high-quality 3-wire military-grade transducer, it delivers accurate and responsive readings crucial for assessing engine performance and ensuring operational safety. The integrated warning light provides an immediate visual alert if boost pressure exceeds a user-defined threshold, helping to prevent potential engine damage. Designed for a 2 5/8 inch mounting hole, this gauge is a valuable addition for any enthusiast looking to closely track their engine’s boost levels.

KEY FEATURES AND BENEFITS:

• Accurate Monitoring: Provides precise readings of boost pressure (0-15 PSI) and vacuum, essential for understanding engine performance.
• High-Quality Sensor: Utilizes a 3-wire military-grade transducer, ensuring reliable and accurate pressure measurements.
• Over-Boost Protection: Features a built-in warning light that alerts the driver to excessive boost pressure, helping to prevent engine damage.
• Standard Sizing: The 2 5/8 inch gauge size fits common aftermarket gauge pods and mounting solutions.
• Complete Installation Kit: Ships with all necessary wiring harnesses and a pressure sensor for a straightforward installation process.

SPECIFICATIONS:

• Gauge Type: Boost/Vacuum Gauge
• Pressure Sender Type: 3-Wire Military Grade Transducer (Performance)
• Range: 0-15 PSI
• Size: 2 5/8 inch
• Hole Size: 2.67 inches (68mm)
• Standard or Metric: Standard
• Warning Light: Yes
• Ships With:
• Pressure Sensor – 30 PSI
• 3 ft Power & Lighting Harness – for LED Lit Gauges and Clocks
• Pressure Gauge Wiring Harness (3-Wire Cable)

HOW TO USE:

1. Mount the Gauge: Securely install the 2 5/8 inch gauge into a suitable mounting location with a 2.67 inch (68mm) diameter hole.
2. Connect the Pressure Sensor: Install the provided 30 PSI pressure sensor to a suitable pressure port on your engine’s intake manifold.
3. Wire the Pressure Sensor: Connect the 3-wire cable from the pressure sensor to the corresponding terminals on the back of the gauge.
4. Connect Power and Lighting: Use the included 3 ft power and lighting harness to connect the gauge to a 12V power source, ground, and the vehicle’s lighting system (if desired for illumination).
5. Set the Warning Threshold (if applicable): Follow the gauge’s specific instructions to set the desired boost pressure level at which the warning light will activate.
6. Monitor Readings: Once installed, the gauge will display real-time boost and vacuum readings while the engine is running. Observe these readings to ensure your engine is operating within its optimal parameters.
7. Heed Warnings: If the warning light illuminates, reduce engine load to decrease boost pressure and investigate the cause of the over-boost condition.

BENEFITS OF USING THE SPEEDHUT 2-5/8" 0-15 PSI BOOST GAUGE W/ WARNING (R25-B2-REV):

• Enhanced Engine Awareness: Provides a clear and immediate indication of your engine’s boost and vacuum levels, allowing for better understanding of its performance.
• Early Over-Boost Detection: The integrated warning light acts as an early warning system, alerting you to potentially damaging high boost conditions before they cause harm.
• Improved Engine Health: By closely monitoring boost levels, you can proactively address any issues that might lead to over-boosting, contributing to the longevity of your engine.
• Accurate and Reliable Data: The military-grade pressure transducer ensures precise and dependable readings, giving you confidence in the information displayed.
• Straightforward Installation: The inclusion of necessary wiring and a pressure sensor simplifies the installation process.

FEATURES:

• Dual Functionality: Displays both positive (boost) and negative (vacuum) pressure readings.
• Robust Transducer: Employs a high-quality 3-wire military-grade sensor for accurate data acquisition.
• Visual Alert System: Features a dedicated warning light to indicate excessive boost pressure.
• Standard Gauge Size: Designed with a 2 5/8 inch diameter for compatibility with common mounting solutions.
• Included Sensor with Higher Range: Comes with a 30 PSI pressure sensor, offering a greater measurement capacity than the gauge’s display range.
• Dedicated Wiring Harnesses: Includes specific harnesses for both power/lighting and the pressure sensor connection, ensuring proper integration.